Skip to content

Secure Consul


For security reasons, we strongly recommend configuring the TLS encryption.

Caution - firewall

We strongly recommend protecting Consul via firewall. Otherwise everyone who may access the Consul Web interface via port 8500 can change the configuration including the user authorization. Only the SEAL Operator servers and maybe the workstations of the system administrators should have access to Consul.


Configure the TLS Encryption

The connection to Consul is secured by the TLS certificate located in the %PROGRAMDATA%\SEAL Systems\config\tls directory. That means that after you have replaced the self-signed certificate enclosed in delivery by your own certificate in Secure the SEAL Operator Services the connection to Consul has already been secured.


Specify a CA Certificate (Unnecessary in Most Cases)

If a CA certificate has been specified, Consul requires a client certificate from each client, that means from all SEAL Operator services. This would require corresponding properties of the certificate and would be a high effort. A complete explanation of how to use client certificates is beyond the scope of this documentation.

For the rare other cases, this is how you configure a CA certificate with Consul:

  1. Open the Consul configuration file:

    %PROGRAMDATA%\SEAL Systems\config\consul.json
    
  2. Insert the following lines in the first level, , for example, after the first opening bracket:

    {
      "ca_file": "C:\\ProgramData\\SEAL Systems\\config\\tls\\ca.pem",
      "verify_outgoing": true,
    ...
    }
    

    Caution - JSON structure

    Pay attention to keep the JSON structure in the Consul configuration file! For further information, refer to http://json.org/json-de.html.

  3. Save the configuration file.

  4. Restart the following service:

    • seal-consul-agent

Configure ACL

Consul comes without ACL (Access Control List) configuration. This is how you configure ACL:

  1. Stop SEAL Operator (on every server in case of a cluster).

  2. Open the Consul configuration file on the SEAL Operator server (on every server in case of a cluster):

    %PROGRAMDATA%\SEAL Systems\config\consul.json
    
  3. Insert the following lines in the first level, for example, after the first opening bracket (on every server in case of a cluster):

    {
      "acl": {
        "enabled": true,
        "default_policy": "deny",
        "enable_token_persistence": true
      },
    ...
    }
    
  4. Start the following service (on every server in case of a cluster):

    • seal-consul-agent
  5. Open a Command Prompt (Administrator) and change to the directory of the Consul program (only on one server in case of a cluster):

    cd C:\Program Files\SEAL Systems\seal-consul-agent
    
  6. Set the following environment variables (only on one server in case of a cluster):

    set CONSUL_HTTP_SSL=true
    set CONSUL_HTTP_SSL_VERIFY=false
    
  7. Execute ACL bootstrap (only on one server in case of a cluster):

    .\consul.exe acl bootstrap
    

    This results in an output like this:

    AccessorID:       770956ae-f0bf-db1d-0dc0-c802b9fdea3a
    SecretID:         145d39a6-1366-7e3b-496e-fd2f2ea6ae23
    Description:      Bootstrap Token (Global Management)
    Local:            false
    Create Time:      2022-01-18 14:33:38.1674571 +0100 CET
    Policies:         00000000-0000-0000-0000-000000000001 - global-management
    
  8. Open the Consul user interface, change to the ACL tab and enter the SecretID from the bootstrap result (in the example above, 145d39a6-1366-7e3b-496e-fd2f2ea6ae23) (only on one server in case of a cluster):

    SecretID in Consul ACL

  9. Change to the Key/Value tab and specify the SecretID from the bootstrap result (in the example above, 145d39a6-1366-7e3b-496e-fd2f2ea6ae23) at the dc/home/env/service/any/tag/any/CONSUL_TOKEN key (only on one server in case of a cluster):

    SecretID in CONSUL_TOKEN

  10. Open the envconsul configuration file on the SEAL Operator server (on every server in case of a cluster):

    %PROGRAMDATA%\SEAL Systems\config\envconsul.json
    
  11. Change the value of consul.token to the SecretID from the bootstrap result (in the example above, 145d39a6-1366-7e3b-496e-fd2f2ea6ae23) (on every server in case of a cluster):

    {
      "consul": {
        "address": "127.0.0.1:8500",
        "ssl": {
          "enabled": true,
          "verify": false
        },
        "token": "145d39a6-1366-7e3b-496e-fd2f2ea6ae23",
        "retry": {
          "attempts": 0
        }
      },
      "sanitize": true,
      "upcase": true,
      "vault": {
        "renew_token": false
      },
      "kill_signal": "SIGTERM"
    }
    
  12. Stop the following service (on every server in case of a cluster):

    • seal-consul-agent
  13. Start SEAL Operator (on every server in case of a cluster).

  14. To enable the services to make DNS requests create the dns-request-policy.hcl file in an arbitrary directory with this content (only on one server in case of a cluster):

    node_prefix "" {
      policy = "read"
    }
    service_prefix "" {
      policy = "read"
    }
    query_prefix "" {
      policy = "read"
    }
    
  15. Execute the following command to create the policy for DNS requests (only on one server in case of a cluster):

    .\consul.exe acl policy create -name "dns-requests" -rules @<arbitrary directory>\dns-request-policy.hcl -token 145d39a6-1366-7e3b-496e-fd2f2ea6ae23
    

    This results in an output like this:

    ID:           4e9cbd04-f18c-237b-6357-e5f6f405b74b
    Name:         dns-requests
    Description:
    Datacenters:
    Rules:
    node_prefix "" {
      policy = "read"
    }
    service_prefix "" {
      policy = "read"
    }
    query_prefix "" {
      policy = "read"
    }
    
  16. Execute the following command to create the token for DNS requests (only on one server in case of a cluster):

    .\consul.exe acl token create -description "Token for DNS Requests" -policy-name dns-requests -token 145d39a6-1366-7e3b-496e-fd2f2ea6ae23
    

    This results in an output like this:

    AccessorID:       31dee823-61b7-a8ca-fec1-9103ea601a15
    SecretID:         9e3f8b90-1c48-1899-8fed-55c94dab6016
    Description:      Token for DNS Requests
    Local:            false
    Create Time:      2022-01-31 14:08:31.5254338 +0100 CET
    Policies:
       4e9cbd04-f18c-237b-6357-e5f6f405b74b - dns-requests
    
  17. Execute the following command to apply the created token (in the example above, 9e3f8b90-1c48-1899-8fed-55c94dab6016) (only on one server in case of a cluster):

    .\consul.exe acl set-agent-token -token 145d39a6-1366-7e3b-496e-fd2f2ea6ae23 default "9e3f8b90-1c48-1899-8fed-55c94dab6016"
    

    This results in an output like this:

    ACL token "default" set successfully
    

Next Step

Continue with: Change the Token for Encrypting the Credentials


Back to top